Precision CNC Machining Equipment & Manufacturing Capabilities
At PRECI5, our production facility in Shenzhen is built around the strict requirements of complex, high-precision engineering projects. We operate a fleet of 114 CNC machining centers and supporting equipment, anchored by premier Mazak and FANUC platforms to ensure uninterrupted throughput and micrometer-level repeatability.
Active owned CNC units under direct facility control.
C600 platforms for complex prismatic contours.
Verified positioning repeatability across lines.
Mazak VCN-430AL standardized manufacturing cells.
Why Our Equipment Fleet Matters for Strategic Procurement
For manufacturing engineers and procurement managers, an equipment list is not an abstract catalogue—it is a verifiable map of operational risk mitigation. Unplanned downtime and tooling bottlenecks can compromise high-stakes supply chains. At PRECI5, our equipment ecosystem is architected around programmatic machine redundancy.
With 8 identical 5-axis machining centers and 39 standardized 4-axis vertical machines, we bypass single-point processing failures. If maintenance occurs or volume spikes, jobs transition across identical tool stations and CNC controllers without requiring program alterations or validation recertification.
Single-Setup 5-Axis Processing: Mazak C600 centers eliminate multi-datum cumulative stack errors.
Parallel High-Volume Cells: 18 FANUC high-speed machines drive 24,000 RPM cycle optimization.
In-House Multi-Tasking: Simultaneous turn-mill architectures execute complex turning and milling concurrently.
Key Equipment & Capacity Inventory
Quantitative parameters across primary Mazak CNC machining centers, FANUC units, and multi-axis turning cells.
| Machine Type | Platform / Model | Quantity | Axis Travel (X/Y/Z mm) | Max Spindle Speed | Magazine | Machine Listed Precision |
|---|---|---|---|---|---|---|
| 5-Axis Machining | Mazak C600 | 8 Units | X900 × Y900 × Z700 | 24,000 rpm | T30 | 0.003 mm |
| 4-Axis Milling | Mazak VCN-430AL | 39 Units | X560 × Y430 × Z510 | 12,000 rpm | T30 | 0.003 mm |
| Horizontal Machining | Mazak HCN5000 | 2 Units | X560 × Y430 × Z510 | 12,000 rpm | T60 | 0.003 mm |
| Turn-Mill Center | Mazak QTC100MY | 10 Units | X300 / Z500 / Φ350 | 6,000 rpm | T12 | 0.003 mm |
| CNC Lathe | Mazak QTE100 | 12 Units | X300 / Z300 / Φ350 | 6,000 rpm | T12 | 0.003 mm |
| High-Speed Vertical | FANUC VMC | 18 Units | 500 × 400 × 300 | 24,000 rpm | — | Standard OEM |
Secondary Finishing & Auxiliary Machinery
Beyond our primary 5-axis and turning lines, the remaining balance of our 114-unit machine shop inventory encompasses dedicated micro-hole drilling systems, precision internal/external cylindrical grinding units, high-precision surface grinders, and industrial honing systems (Sunnen and Puris). This full-spectrum integration allows us to achieve strict micro-finish surface textures and internal bore tolerances without third-party outsourcing.
Quality Assurance & In-Line Inspection Rigor
Tight tolerances are only as dependable as the equipment validating them. Our climate-controlled quality lab guarantees strict compliance with drawings, GD&T callouts, and raw material verifications.
ZEISS & Sirius CMMs
Automated multi-sensor coordinate measuring systems capable of sub-micron volumetric spatial verification for complex 5-axis contours.
Optical Video Systems
Non-contact 2.5D optical measuring instruments designed for precise micro-feature geometry, chamfers, and edge radius validation.
X-Ray Spectrometry
Material composition testing using X-ray fluorescence to ensure incoming aerospace and medical alloys comply with raw chemical specifications.
Surface Metrology
High-resolution stylus profilers to calibrate Ra, Rz, and Rmax values on critical sliding, sealing, and precision-honed bearing surfaces.
Seamless Scaling: From NPI Prototypes to Full-Scale Run
A persistent headache for procurement teams is transitioning from prototype fab shops to production manufacturers. Tool paths, fixturing logic, and surface finishes often drift during handoff.
PRECI5 solves this by manufacturing New Product Introduction (NPI) prototypes on the exact same Mazak and FANUC centers reserved for scaled production. The CNC feeds, speeds, tool compensations, and quality work instructions established during sample verification are locked and deployed directly into mass output cells.
Quality Certifications & Industrial Accreditations
Our factory operations and continuous quality control workflows are audited and certified to internationally recognized benchmarks:
Send Your Drawing for a Machinability Review & Quote
Planning a custom precision component or seeking backup capacity for an active production line? Submit your 2D/3D technical drawings (STEP, IGES, DXF, or PDF). Our senior manufacturing engineers conduct a thorough DFM (Design for Manufacturability) analysis and provide a transparent quote within 24 hours.
Request an Equipment-Matched Quote
Complete the specifications below. Our engineering cell will match your tolerances against our active machine capacity.